Do not approach munitions
under any circumstances →
Country or territory where the image was reported

Reported Location (52)

Year the image is reported to have been taken

Year (22)

Classification groups of key explosive munitions used in conflicts

Munition Category (8)

The impact or effect the munition is intended to have

Functional use (10)

The specific model of munition pictured

Tentative Model (354)

A temporary ID code assigned by ARES.
[TEMP] ARES-TMID-0015
✕

Search

The external organisation that documented the munition

Research Organisation (6)

Colour of the munition pictured

Base Colour (12)

Colour of all, or some, of the markings on the munition

Marking Colour (11)

Language or script of the marking on a munition

Marking Script (10)

Condition of the munition pictured

Condition (6)

Key features defining the operation mechanisms of a projectile

Mechanical Feature (10)

Whether a munition is guided or unguided

Guidance (2)

Where the munition is launched from and what it targets

Domain (7)

The type of fins visible on the munition

Fins Characteristic (6)

The nominal diameter of a projectile. For most modern munitions, this is expressed in millimetres (e.g. 82 mm mortar projectile), but older artillery gun projectiles may be described in inches.

Calibre (77)

Weight class of the aerial bomb pictured

Weight Class (14)

× Clear all filters
1–10 of 10

Current Filter

[TEMP] ARES-TMID-0015
This is a one-way attack (OWA) unmanned aerial vehicle (UAV) believed to be designed and produced by the United Arab Emirates (UAE). Functionally, this munition is a missile. While ARES can assess with high confidence that this munition was designed and produced by the UAE, the model name or designation is not publicly known, so the temporary munition identifier of ARES-TMID-0015 has been assigned. TMID-0015, like TMID-0014, has been documented carrying the Modamer warhead produced by Halcyon, an Emirati company. TMID-0015 has been observed in Iran, in functioned and unfunctioned conditions, and the Modamer warhead has been clearly visible. (ARES July 2026)
OSMP2385
Rocket or Missile Iran [TEMP] ARES-TMID-0015
Analyst Note:
The colour of this image appears more yellow than would be expected, perhaps as a result of a digital filter. In other images of the same remnants, the Modamer warheads pictured here appear to be grey, rather than tan. (ARES)
OSMP2387
Rocket or Missile Iran [TEMP] ARES-TMID-0015
Analyst Note:
This image shows remnants of several one-way attack UAVs, as well as two unfunctioned Modamer warheads. Modamer warheads are blast/fragmentation warheads with an overall weight of 34.5 kg (76 lb). The Modamer warhead designs are produced by Halcon, a subsidiary of Edge Group, which is owned by the Emirati state. (ARES)
OSMP2389
Rocket or Missile Iran [TEMP] ARES-TMID-0015
Analyst Note:
This image shows an unknown model of one-way attack (OWA) UAV believed to be produced and employed by the United Arab Emirates (UAE). ARES has assigned a temporary munitions identifier (TMID) of TMID-0015 to this munition. The UAV’s nose and a Modamer warhead can be seen, detached, to the left of the main body. (ARES)